Cutting-Edge Research Publications by Biomedical Engineering Faculty: Pioneering Innovations in Healthcare and Technology

Dr. Hifsa Shahid (Chairperson)

  1. Desalination and Sterilization of Sea Water Using Active Optimized Optical Heat Concentration System -(2023)Hifsa Shahid, Umer Rashid, Haris Anwaar, Muhammad Salim Butt, Faheem Gohar Awan, Farhan Ahmad Butt, Frederic Nzanywayingoma, USA
  2. Power Generation Analysis of Terrestrial Ultraviolet-Assisted Solid Oxide Electrolyzer Cell -(2022)Muhammad Salim Butt, Hifsa Shahid, Fahan Ahmed Butt, Iqra Farhat, Munazza Sadaf, Muhammad Rashid, Ahmed Taha, Switzerland
  3. Design and Implementation of an Active Optimized Optical Green Energy Generation System Using Ultraviolet Solar Irradiance -(2022)Hifsa Shahid, Muhammad Salim Butt, Umer Rashid, Farhan Ahmed Butt, Haris Anwer, Hafiz Muhammad Obaid, Munazza Sadaf, Muhammad Adnan, Germany
  4. Hybrid Underwater Intelligent Communication System -(2022)Kinza Noor, Hifsa Shahid, Hafiz Muhammad Obaid, Abdul Rauf, Amna Yousaf, Abdullah Shahid, Netherland
  5. Thermal stabilization, energy, cost and life analyses of hybrid photovoltaic-phase change composite system -Part 1 -(2022)Hifsa Shahid, Aiza Ahmad, Umair Ahmad, Gulfam Raza, Muhammad Rashid, Mohsin Kazmi, Netherland
  6. Achieving gain flattening over 110 nm bandwidth using Er-Yb co-doped fiber/multi-section fiber optical parametric hybrid amplifier -(2021)Hafiz Muhammad Obaid, Hifsa Shahid, Netherlands
  7. Design of ultra-wide tetra band phased array inverted T-shaped patch antennas using DGS with beam-steering capabilities for 5G applications -(2020)Muhammad Anas, Hifsa Shahid, Abdul Rauf, Abdullah Shahid, International Journal of Microwave and Wireless Technologies
  8. Performance evaluation of hybrid optical amplifiers for a 100 × 10 Gbps DWDM system with ultrasmall channel spacing -(2020)Hafiz Muhammad Obaid, Hifsa Shahid, Optik – International Journal for Light and Electron Optics
  9. Gain flattened C-band hybrid optical amplifier achieving high and flat gain over 32-nm bandwidth for dense wavelength division multiplexed system -(2019)Hafiz Muhammad Obaid, Hifsa Shahid, Optical Engineering
  10. Numerical achievement of high and flat gain using Er-Yb co-doped fiber/Raman hybrid optical amplifier -(2019)Hafiz Muhammad Obaid, Hifsa Shahid, Optik – International Journal for Light and Electron Optics
  11. Er –Yb codoped waveguide/Raman hybrid optical amplifier with enhanced gain for DWDM system -(2018)Hafiz Muhammad Obaid, Hifsa Shahid, Optical Engineering
  12. Design and modeling of an optical band gap matched temperature controlled indoor concentrated light transmission system for photovoltaic energy production -(2018)Hifsa Shahid, Muhammad Kamran, Munazza Sadaf, Muhammad Irfan Abid, Muhammad Rayyan Fazal, Muhammad Mudassar, Optik – International Journal for Light and Electron Optics
  13. Novel Flat-Gain L-band Raman/Er-Yb Co-doped Fiber Hybrid Optical Amplifier for High Capacity DWDM System -(2018)Hafiz Muhammad Obaid, Hifsa Shahid, Optik – International Journal for Light and Electron Optics
  14. Achieving high gain using Er-Yb codoped waveguide/fiber optical parametric hybrid amplifier for dense wavelength division multiplexed system -(2018)Hafiz Muhammad Obaid, Hifsa Shahid, Optical Engineering
  15. Implementation of the novel temperature controller and incremental conductance MPPT algorithm for indoor photovoltaic system -(2018)Hifsa Shahid, Muhammad Kamran, Muhammad Yasir Saleem, Muhammad Mudassard and Karrar Haider, Solar Energy
  16. Monte Carlo model incorporating many-body effects for determining the gain spectra of quantum dot lasers -(2015)Negin Peyvast, Hifsa Shahid, Richard A. Hogg and David T. D. Childs, The Japan Society of Physics, Applied Physics Express
  17. Gain Spectrum Measurement Using the Segmented Contact Method with an Integrated Optical Amplifier -(2014)H. Shahid, D.T.D. Childs, M.A. Majid, K. Kennedy, R. Airey, R.A. Hogg, E. Clarke, P.Spencer and R.Murray, Journal of applied physics
  18. Negative Differential Gain Due to Many Body Effects in Self-Assembled Quantum Dot Lasers -(2011)H. Shahid, D. T. D. Childs, B. J. Stevens and R. A. Hogg, Applied Physics Letters
  19. Towards 1550μmGaAs-based Lasers Using InAs/GaAs Quantum Dot Bilayers -(2011)M. A. Majid, D.T.D Childs, H. Shahid, S.Chen, K. Kennedy, R. J. Airey, R. A. Hogg, E. Clarke, P. Howe, P. Spencer and R. Murray, IEEE Journal of Selected Topics in Quantum Electronics
  20. 1.52 μm electroluminescence from GaAs-based quantum dot bilayers -(2011)M.A. Majid, D.T.D. Childs, H. Shahid, R. Airey, K. Kennedy, R.A. Hogg, E. Clarke and P. Spencer, Electronic Letters
  21. Excited State Bilayer Quantum Dot Lasers at 1.3 μm -(2011)M. A. Majid, D.T.D Childs, H. Shahid, S.Chen, K. Kennedy, R. J. Airey, R. A. Hogg, E.Clarke, P. Spencer and R. Murray, Japanese Journal of Applied Physics
  22. Direct modulation of excited state quantum dot lasers -(2009)B. J. Stevens, D. T. D. Childs, H. Shahid, and R. A. Hogg, Applied Physics Letters

Dr. Nida Iqbal (Associate Professor)

  1. Murni Nazira Sarian, Nida Iqbal, Pedram Sotoudehbagha, Mehdi Razavi, Qamar Uddin Ahmed, Cortino Sukotjo, Hendra Hermawan, “Potential bioactive coating system for high-performance absorbable magnesium bone implants”, Bioactive Materials, 12, 42-63, 2022, Impact factor = 14.593. 
  1. H.R. Bakhsheshi-Rad, A. Najafinezhad, Z. Hadisi, Nida Iqbal, M. Daroonparvar, Safian Sharif, Ahmad Fauzi Ismail, M. Akbari, Seeram RamaKrishna, F. Berto, “Characterization and biological properties of nanostructured clinoenstatite scaffolds for bone tissue engineering applications”, Materials Chemistry and Physics, 259, 123969, 2021, Impact factor = 3.408. 
  1. Nida Iqbal., Saman, I., Tanveer I., Bakhsheshi-Rad, H. R., Ahmed, A., Ahmad, K., Rafiq, A. K., Hasbullah, I., Balaji H.R., Zinc-doped hydroxyapatite-zeolite/polycaprolactone composites coating on magnesium substrate for enhancing in-vitro corrosion and antibacterial performance. Transactions of Nonferrous Metals Society of China, 30, 123−133, 2020, Impact factor = 2.338. 
  1. Saman Iqbal, Muhammad Shahid Rafique, Sultan Akhtar, Nida Liaqat, Nida Iqbal, Rabia Ahmad, “A comparative study on finding an effective root for the introduction of hydrogen into microplasma during diamond growth” Physics and Chemistry of Solids, 122, 72-86, 2018, Impact factor = 2.75. 
  1. H. R. Bakhsheshi-Rad, E. Hamzah, A. F. Ismail, M. Aziz, E. Karamian, Nida Iqbal, “Bioactivity, in-vitro corrosion behavior, and antibacterial activity of silver–zeolites doped hydroxyapatite coating on magnesium alloy” Trans. Nonferrous Met. Soc. China 28, 1553−1562, 2018, Impact factor = 2.338 
  1. Mustafa K. Ibrahim, E. Hamzah, Safaa N. Saud, E. M. Nazim, Nida Iqbal, A. E. Bahador, “Effect of Sn additions on the microstructure, mechanical properties, corrosion and bioactivity behaviour of biomedical Ti–Ta shape memory alloys”, Journal of Thermal Analysis and Calorimetry, 131, 1165-1175, 2018, Impact Factor = 2.471.  
  1. Roohollah Sharifi, Davood Almasi , Izman Bin Sudin , Mohammed Rafiq Abdul Kadir , Ladan Jamshidy, SeyedMojtaba Amiri, Hamid RezaMozaffari , Maliheh Sadeghi , Fatemeh Roozbahani, and Nida Iqbal, “Enhancement of the mechanical properties of hydroxyapatite/sulphonated poly ether ether ketone treated layer for orthopaedic and dental implant”,  International Journal of Biomaterials, 2018, 1-9, 2018 (Scpous). 
  1. Saman Iqbal, Muhammad Shahid Rafique, Nida Iqbal, Shazia Bashir, Shafaq Arif, Rabia Ahmad, “Impact of radiation induced crosslinking on structural, morphological, mechanical and optical properties of Polymethylmethacrylate thin films”, Progress in Organic Coatings, 111, 202-209, 2017, Impact Factor = 2.85. 
  1. Azmi, S., Razak, S.I.A., Abdul Kadir, M.R., Nida Iqbal., Hassan, R., Nayan, N.H.M., Abdul Wahab, A.H., Shaharuddin, S., “Reinforcement of poly(vinyl alcohol) hydrogel with halloysite nanotubes as potential biomedical materials”, Soft Materials, 15, 45-54, 2017, Impact Factor = 0.973. 
  1. Nida Iqbal, Mohammed Rafiq Abdul Kadir, “A Simple Microwave Route for the Synthesis of Tricalcium Phosphate (βTCP) Powders for Bone Healing Applications”, Materials Science Forum, 894,14-16, 2017, Scopus.  
  1. Norjihada Izzah Ismail, Mohammed Rafiq Abdul Kadir, Nasrul Humaimi Mahmood, Om Prakash Singh, Nida Iqbal and Razauden Mohamed Zulkifli, “Apini and Meliponini foraging activities influence the phenolic content of different types of Malaysian honey” Journal of Apicultural Research, 55, 137-150, 2016, Impact Factor = 1.752.  
  1. Saud, S.N., Raheleh Hosseinian, S., Bakhsheshi-Rad, H.R, Yaghoubidoust, F., Nida Iqbal, Hamzah, E., Ooi, C.H.R. “Corrosion and bioactivity performance of graphene oxide coating on Ti-Nb shape memory alloys in simulated body fluid” Materials Science and Engineering C, 68, 687-694, 2016, Impact Factor = 4.959. 
  1. HR Bakhsheshi-Rad, Hamzah, E., Ismail, A.F., Kasiri-Asgarani, M., Daroonparvar, M., Parham, S., Nida Iqbal, Medraj, M., “Novel bi-layered nanostructured SiO2/Ag-FHAp coating on biodegradable magnesium alloy for biomedical applications”, Ceramics International, 42, 11941-11950, 2016, Impact Factor = 3.450. 
  1. Davood Almasi, Maliheh Sadeghi, Woei Jye Lau, Fatemeh Roozbahani, Nida Iqbal, “Functionally Graded Polymeric Materials: A Brief Review of Current Fabrication Methods and Introduction of a Novel Fabrication Method”, Materials Science and Engineering C, 64, 102-107, 2016, Impact Factor = 4.959. 
  1. Shariqa H. B., M. S. Rafique, K. Siraj, A. Latif, Amina Afzal, M. S. Awan, Shazia Bashir, Nida Iqbal, “Epitaxial thin-film growth of Ruddlesden–Popper-type Ba3Zr2O7 from a BaZrO3 target by pulsed laser deposition” Applied Physics A, 122, 658-666, 2016, Impact Factor = 1.784. 
  1. Nida Iqbal, M. R. Abdul Kadir, Saman Iqbal, Saiful Izwan Abd Razak, M. Shahid Rafique, H.R. Bakhsheshi-Rad, Mohd. Hasbullah Idris, M.A.Khattak, H.R. B. Raghavendran, AA Abbas, “Nano-hydroxyapatite reinforced zeolite ZSM composites: A comprehensive study on the structural and in vitro biological properties”, Ceramics International, 42, 7175–7182, 2016, Impact Factor=  3.450. 
  1. HR Bakhsheshi-Rad, E Hamzah, M Kasiri-Asgarani, S Jabbarzare, Nida Iqbal, MR Abdul Kadir, “Deposition of nanostructured fluorine-doped hydroxyapatite–polycaprolactone duplex coating to enhance the mechanical properties and corrosion resistance of Mg alloy”, Materials Science and Engineering C, 60, 226-237, 2016, Impact Factor = 4.959. 
  1. Davood Almasi, Nida Iqbal, Maliheh Sadeghi, Izman Sudin, Mohammed Rafiq Abdul Kadir and Tunku Kamarul “Preparation methods for improving PEEK’s bioactivity for orthopaedic and dental application: a review”, International Journal of Biomaterials, 2016,1-12, 2016 (Scopus) 
  1. Khattak, M.A., Noh, M.M., Tamin, M.N., Nida Iqbal., Syariff, A.H.M., Kazi, S.,  Ghaffa, M.H.A., “Effect of artificially produced pit-like defects on the strength of AISI 410 stainless steel compressor blades”, Jurnal Teknologi, 78, 117-121, 2016 (Scopus). 
  1. Amir H.M. S.,   Nurun, N., Nida Iqbal, Nur, F.R., Lee, L.H., Mariam, F.M.N., Sharifudin, M.S., Wan Rashidah, W.A.K.,  A. A. Mukred, J.,  Razauden, Z.,  Mona, Z. “Effect of heat treatment on the antioxidant activities of two cultivars of sweet potatoes”, Jurnal Teknologi, 78, 111-115, 2016 (Scopus). 
  1. Naghizadeh, F, Abdul Kadir, M.R, Doostmohammadi,  Roozbahani, F.,  Nida Iqbal,  Taheri, M.M,  Naveen, S.V.,  Kamarul, T, “Rice husk derived bioactive glass-ceramic as a functional bioceramic: Synthesis, characterization and biological testing”,  Journal of Non-Crystalline Solids, 427, 54-61, 2015, Impact Factor =  2.600. 
  1. Nida Iqbal, Kashif Ijaz, Muniza Zahid, Abdul S. Khan, Mohammed Rafiq Abdul Kadir, Rafaqat Hussain, Anis-ur-Rehman, Jawwad A. Darr, Ihtesham-ur-Rehman, Aqif A. Chaudhry “Microwave Assisted Synthesis and Characterization of Magnesium Substituted Calcium Phosphate Bioceramics” Materials Science and Engineering C, 56, 286-293, 2015, Impact Factor = 4.969. 
  1. Nida Iqbal, Mohammed Rafiq Abdul Kadir, Nasrul Humaimi Bin Mahmood, Saman Iqbal, D. Almasi, Farnaz Naghizadeh, H. R. Balaji, Tunku Kamarul,  
    “Characterization and biological evaluation of silver containing fluoroapatite nanoparticles prepared through microwave synthesis”, Ceramics International, 41, 6470-6477, 2015, Impact Factor = 3.450. 
  1. Almasi, S. Izman, M. Sadeghi, Nida Iqbal, F. Roozbahani, G. Krishnamurithy, T. Kamarul, M.R. Abdul Kadir, “In Vitro Evaluation of Bioactivity of Chemically Deposited Hydroxyapatite on Polyether Ether Ketone”, International Journal of Biomaterials, 2015, 1-5, 2015 (Scopus).  
  1. Y. Manickam, M.F.M. Nordin, K. Shameli, R. Wannahari, Nida Iqbal, A.H.M. Syarif, “Comparative Studies on Different Kind of Durian Husks as Microstructure Activated Carbon”, Journal of Optoelectronics and Biomedical Materials, 7, 53 – 58, 2015.  
  1. Nida Iqbal, Mohammed Rafiq Abdul Kadir, , Nasrul Humaimi Bin Mahmood, Mohammad Faiz Mohammad Yusoff, Jamal Akhter Siddiqui, Norita Salim, Gabriele R.A Froemming, N. S. Murni, H. R. Balaji, Tunku Kamarul, “Microwave synthesis, characterization, bioactivity and in vitro biocompatibility of Zeolite-Hydroxyapatite (Zeo-HA) composite for bone tissue engineering applications”, Ceramics International, 40, 16091-16097, 2014, Impact Factor = 3.450 
  1. Mohd Faiz Mohd Yusoff, Mohammed Rafiq Abdul Kadir, Nida Iqbal, Mas Ayu Hassan, Rafaqat Hussain, “Dipcoating of poly (ɛ-caprolactone)/hydroxyapatite composite coating on Ti6Al4V for enhanced corrosion protection”, Surface and Coatings Technology, 245, 102-107, 2014, Impact Factor = 3.192. 
  1. Nida Iqbal, Mohammed Rafiq Abdul Kadir,Nasrul Humaimi Bin Mahmood, Norita Salim, Gabriele R.A Froemming, H R Balaji, Tunku Kamarul, “Characterization, antibacterial activity and and in vitro compatibility of zinc- silver doped hydroxyapatite nanoparticles prepared through microwave synthesis”, Ceramics International, 40, 4507-4513, 2014, Impact Factor = 3.450. 
  1. Nida Iqbal, Mohammed Rafiq Abdul Kadir, Nik Ahmad Nazim Nik Malek, Nusrul Humaimi bin Mahmood, Raman Murali, T. Kamarul, “The Characterization and Antibacterial Properties of Stable Silver Substituted Hydroxyapatite Nanoparticles Synthesized through Surfactant assisted Microwave Process”, Material Research Bulletin, 48, 3172–3177, 2013 Impact Factor = 3.355.  
  1. Nida Iqbal, Mohammed Rafiq Abdul Kadir, Nik Ahmad Nazim Nik Malek, Nusrul Humaimi Bin Mahmood, Micheal Moses, “Effect of silver ions on the structural and antibacterial properties of bone replacement material”, Advanced Materials Research, 795, 692-696, 2013.  
  1. Nida Iqbal, M. A. Kadir, N.A.N.N. Malek, H.Mahmood, M. R. Murali, T. Kamarul, “Rapid microwave assisted synthesis and characterization of nanosized silver-doped hydroxyapatite with antibacterial properties”, Material Letters, 89, 118–122, 2012, Impact Factor = 3.109. 
  1. S.Iqbal, M. S. Rafique, S. Anjum, A. Hayat, Nida Iqbal, “Impact of X-ray irradiation on PMMA thin films” Applied Surface Science, 259, 853-860, 2012,   Impact Factor = 5.155. 
  1. Nida Iqbal, R.Nazir , A. Asif , A. A. Chaudhry , M. Akram, G. Y. Fan , A. Akram, R. Amin, S. H. Park, R. Hussain, “Electrophoretic deposition of PVA coated hydroxyapatite on 316L stainless steel”, Current Applied Physics, 12, 755-59, 2012 , Impact Factor = 2.010.http://www.sciencedirect.com/science/article/pii/S1567173911005761 
  1. R. Nazir, Nida Iqbal, A.S. Khan, , M.A. Akram, A. Asif, A.A. Chaudhry, I. Ur. Rehman, R. Hussain, “Rapid Synthesis of Thermally Stable Hydroxyapaptite”, Ceramics International, 38, 457–462, 2012, Impact Factor = 3.450. 
  1. A. Akram, R. Hussain, M Mujahid, S. Javed, H. Javed, Nida Iqbal, “A convenient Synthesis Route of Hydroxyapatite from Egg Shells”, NUST Journal of Engineering Sciences, 4, 7-20, 2011. 
  1. M. B. Khan, R. Hussain, M. A. Akram, Nida Iqbal, “Microwave Augmented Fabrication and Evaluation of CNT-Reinforced Nanohydroxyapatite”, Journal of Advanced Materials, 326, 110-120, 2011. 
  1. Nida Iqbal, M. Imran, J. Iqbal, Z. Mahmood “Comparative Studies on Adsorption of Congo Red (CR) by Low Cost Adsorbents Prepared from Different Varieties of Melon Seeds”, Asian journal of chemistry, 22, 1993-2002, 2010, Impact Factor = 0.146. 
  1. Nida Iqbal, M. Imran, J. Iqbal “Synthesis, characterization and antibacterial studies of schiff base derived from sulfonamide and benzaldehyde” Journal of scientific research, 39(1); 15-20. 2009.  

Engr. Adnan Rauf (Assistant Professor)

  1. Membrane allocation profiling: A method to characterize three-dimensional cell shape and attachment based on surface reconstruction Frank Sommerhage, Rita Helpenstein, Adnan Rauf, Gu¨ nter Wrobel, Andreas Offenha¨usser, Sven Ingebrandt* Institute of Bio- and Nanosystems (IBN2) and CNI – Center of Nanoelectronic Systems for Information Technology, Forschungszentrum Ju¨lich GmbH, D-52425 Ju¨lich, Germany

Dr. Farooq Mukhtar (Assistant Professor)

Book Chapter & Papers
[1] M. Latif, G. Macchiarella, F. Mukhtar, and F. Gohar Awan, \A novel realization of fully canonical and pseudo-elliptic
wideband waveguide lters,” in 2021 IEEE MTT-S International Microwave Filter Workshop (IMFW), 2021, pp.
98{101.
[2] M. Latif, G. Macchiarella, and F. Mukhtar, \A novel coupling structure for inline realization of cross-coupled
rectangular waveguide lters,” IEEE Access, vol. 8, pp. 107 527{107 538, 2020.
[3] F. Mukhtar and P. Russer, \Brunes algorithm for lumped element equivalent circuit synthesis of linear lossy
multiports,” AEU – International Journal of Electronics and Communications, vol. 76, pp. 175 { 187, 2017. [Online].
Available: http://www.sciencedirect.com/science/article/pii/S1434841116307348
[4] J. A. Nossek, P. Russer, T. Noll, A. Mezghani, M. Korb, F. Mukhtar, H. Yordanov, and J. A. Russer, \Chip-to-chip
and on-chip communications,” in UKoLoS Ultra-Wideband Radio Technologies for Communications, Localization
and Sensor Applications, R. S. Thoma, H. Willms, T. Zwick, R. Knochel, and J. Sachs, Eds. [Online]. Available:
http://cdn.intechopen.com/pdfs/43648/InTech-Chip to chip and on chip communications.pdf
[5] F. Mukhtar, J. A. Russer, S. Wane, D. Bajon, A. Y. Kuo, and P. Russer, \Brune four-port equivalent circuit models
for MMMICs,” in Proc. European Microwave Conference 2014, Rome, EuMC, Italy, Oct. 2014, pp. 564 { 567.
[6] F. Mukhtar, J. A. Russer, S. Wane, A. Y. Kuo, D. Bajon, and P. Russer, \Brune lumped element multiport modeling
of mmmics,” in XXXIst General Assembly and Scienti c Symposium of Int. Union of Radio Science, Beijing, URSI
GASS, China, Aug. 2014, pp. 1 { 4.
[7] J. A. Russer, F. Mukhtar, S. Wane, D. Bajon, A. Y. Kuo, and P. Russer, \Variation-aware x-topology architecture
with local ground references for broadband characterization of on-chip passives,” in IEEE Radio Frequency Integrated
Circuits, Tampa Bay (Florida), RFIC, U.S.A., June. 2014, pp. 437{440.
[8] F. Mukhtar and P. Russer, \Brune’s multiport lumped element equivalent circuits in admittance representation,” in
Int. Conf. Electromagnetics Adv. Appl., Torino (Turin), ICEAA, Italy, Sept. 2013, pp. 964{967.
[9] ||, \Brune’s algorithm for circuit synthesis,” in Int. Microwave Symp., Seattle, IMS, US-WA, June. 2013, pp. {.
[10] J. A. Russer, F. Mukhtar, A. Gorbunova, A. Baev, Y. V. Kuznetsov, and P. Russer, \A brune’s two-port process
applied to lumped element lter modeling,” in Int. Microwave Symp., Seattle, IMS, US-WA, June 2013, pp. {.
[11] P. Russer, J. Russer, F. Mukhtar, P. Lugli, S. Wane, D. Bajon, and W. Porod, \Integrated antennas for rf sensing,
wireless communications and energy harvesting applications,” in Int. Workshop Ant. Tech., Karlsruhe, iWAT,
Germany, Mar. 2013, pp. 1{4.
[12] J. Russer, F. Mukhtar, B. Stosic, T. Asenov, A. Atanaskovic, N. Doncov, B. Milovanovic, and P. Russer, \Systematic
network model generation for linear reciprocal microwave multiports,” in European Microwave Integrated Circuits
Conf., Amsterdam, EuMIC, Oct. 2012, pp. 40{43.
[13] F. Mukhtar, J. A. Russer, Y. Kuznetsov, and P. Russer, \Methodology for generation of brune’s equivalent circuit
models for linear passive reciprocal multi-ports,” in Int. Conf. Electromagnetics Adv. Appl., Cape Town, ICEAA,
South Africa, Sept. 2012, pp. 674{677.
[14] A. Baev, A. Gorbunova, Y. Kuznetsov, F. Mukhtar, J. A. Russer, P. Russer, D. Bajon, and S. Wane, \Equivalent
circuit model for coupled monolithic integrated millimeter-wave folded antennas,” in Int. Conf. Electromagnetics
Adv. Appl., Cape Town, ICEAA, South Africa, Sept. 2012, pp. 598 {601.
[15] J. Russer, F. Mukhtar, S. Wane, D. Bajon, and P. Russer, \Design and modeling of monolithic integrated millimeterwave
chip-package antennas and wireless communication links,” in IEEE Asia-Paci c Conf. Ant. Prop., Singapore,
APCAP, Singapore, Aug. 2012, pp. 211{212.
[16] ||, \Broad-band modeling of bond wire antenna structures,” in 7th German Microwave Conf., Ilmenau, GeMiC,
Germany, Mar. 2012, pp. 1{4.
[17] J. Russer, N. Doncov, F. Mukhtar, B. Stosic, B. Milovanovic, and P. Russer, \Compact equivalent network synthesis
for double-symmetric four-ports,” in Int. Conf. Telecomm. Modern Satellite Cable and Broadcasting Services, Nis,
Serbia, TELSIKS, vol. 2, Oct. 2011, pp. 383 {386.
[18] J. Russer, A. Gorbunova, F. Mukhtar, H. Yordanov, A. Baev, Y. Kuznetsov, and P. Russer, \Equivalent circuit
models for linear reciprocal lossy distributed microwave two-ports,” in IEEE MTT-S Int. Microwave Symp. Digest,
Baltimore, MTT, 2011, June 2011, pp. 1 {4.
[19] F. Mukhtar, Y. Kuznetsov, C. Ho mann, and P. Russer, \Brune’s synthesis of linear lossy distributed one-port and
symmetric two-port microwave circuits,” in German Microwave Conf., Darmstadt, GeMIC, Germany, Mar. 2011,
pp. 1 {4.
[20] J. A. Russer, A. Baev, Y. Kuznetsov, F. Mukhtar, H. Yordanov, and P. Russer, \Combined lumped element network
and transmission line model for wireless transmission links,” in German Microwave Conf., Darmstadt, GeMIC,
Germany, Mar. 2011, pp. 1 {4.
[21] F. Mukhtar, H. Yordanov, and P. Russer, \Network model of on-chip antennas,” Advances in Radio Science, vol. 9,
pp. 237{239, 2011. [Online]. Available: http://www.adv-radio-sci.net/9/237/2011/
[22] F. Mukhtar, Y. Kuznetsov, and P. Russer, \Network modelling with brune’s synthesis,” Advances in Radio Science,
vol. 9, pp. 91{94, 2011. [Online]. Available: http://www.adv-radio-sci.net/9/91/2011/
[23] J. A. Russer, F. Mukhtar, A. Baev, Y. Kuznetsov, and P. Russer, \Combined lumped element network and
transmission line synthesis for passive microwave structures,” Advances in Radio Science, vol. 9, pp. 95{98, 2011.
[Online]. Available: http://www.adv-radio-sci.net/9/95/2011/

Engr. Namra Afzal (Lecturer)

International Journals

1. Ali, H., Gilani, S. O., Waris, A., Shah, U. H., Khattak, M. A. K., Khan, M. J., & Afzal, N. (2023). Memorability-based multimedia analytics for robotic interestingness prediction system using trimmed Q-learning algorithm. Scientific Reports, 13(1), 19799.

International Conferences

1. Naqvi, S. M. R. K., Iqbal, A., Ameen, S. Z., & Afzal, N. (2022, October). Acupressure based Therapeutic Smart Shoe for Developing Countries. In 2022 24th International Multitopic Conference (INMIC) (pp. 1-6). IEEE.

  1. Afzal, N., Ramzan, B., Fatima, N., Khalid, M., Waris, A., Gilani, S. O., & Anwar, M. N. (2023, October). Plantar Pressure Response for Classification of Parkinson’s Disease patients with Gait Abnormalities using Machine Learning. In 2023 3rd International Conference on Digital Futures and Transformative Technologies (ICoDT2) (pp. 1-6). IEEE.
  2. Afzal N, Muneeba Noor, Asfa Tahir, Haseeb ur Rehman ‘ Foot Insole Fabrication for Plantar Pressure Analysis’. In 2024, 21st IBCAST 2024 International Bhurban Conference on Applied Sciences & Technology
  3. Afzal N, Muneeba Noor, Asfa Tahir, Haseeb ur Rehman ‘Plantar Pressure Analysis during Stress Condition ’. In 2024, 4th International Conference on Digital Futures and Transformative Technologies (ICoDT2)

Ms. Afifa Barakullah (Lecturer)

  1. Mir, M., Ali, M. N., Barakullah, A., Gulzar, A., Arshad, M., Fatima, S., & Asad, M. (2018). Synthetic polymeric biomaterials for wound healing: a review. Progress in Biomaterials, 121.
  2. Mairum Mir, Murtaza Najabat Ali, Ayesha Gulzar, Afifa Barakullah, Munam Arshad, Bakhtawar Ghafoor and Hafsah Inam (2018). Design and fabrication of a hydrogel-based pH sensor array for physiological applications. In:19th World Congress on Material Science and Engineering.[online] Barcelona, Spain

Engr. Muhammad Salaar Arif Khan (Lecturer)

  1. S. Khan et al., “Sampling Order-limited Signals on the Sphere”, International Conference on Acoustics, Speech and Signal Processing (ICASSP), 2023.
  2. S. Khan et al., “Impact of Sustainable Marketing Activities on Brand Loyalty: mediating role of Brand Image and Customer Trust”, International Journal of Governance and Sustainability (IJGS), 2021
  3. S. Khan and A. Bashir, “Assessment of Intra-Hepatocellular Lipid Content using Magnetic Resonance Spectroscopy”,  International Conference on Electrical, Communication, and Computer Engineering (ICECCE), 2019